BTI Equipment

(2) HAAS VF-2  Vertical Machining Center

The Haas VF-2 vertical machining center has 30" x 16" x 20" (762 x 406 x 508 mm) xyz travels.

The Haas VF-2 is a rugged, small-footprint VMC that yields reliability and accuracy in a small-framed machine. The VF-2 has a 40-taper cartridge spindle driven by a 20 hp vector Dual-Drive (Y-Delta) motor. The VF-2 produces either 75 ft-lb of torque at a low 1400 rpm, or 250 ft-lb at 450 rpm with the optional 2-speed gearbox -- and will also run up to 7500 rpm in 1.2 seconds for finishing aluminum.

(1) HAAS VF-3  Vertical Machining Center

The Haas VF-3 vertical machining center has 40" x 20" x 25" (1016 x 508 x 635 mm) xyz travels.

The Haas VF-3 is a rugged, medium-sized VMC that yields full reliability and accuracy in a moderately-sized machine. The VF-3 has a 40-taper cartridge spindle driven by a 20 hp vector Dual-Drive (Y-Delta) motor. The VF-3 produces either 75 ft-lb of torque at a low 1400 rpm, or 250 ft-lb at 450 rpm with the optional 2-speed gearbox -- and will also run up to 7500 rpm in 1.2 seconds for finishing aluminum.

(2) HAAS VF-4  Vertical Machining Center

The Haas VF-4 vertical machining center has 50" x 20" x 25" (1270 x 508 x 635 mm) xyz travels .

The Haas VF-4 is a rugged, medium-sized VMC that yields full reliability and accuracy in a moderately-sized machine. The VF-4 has a 40-taper cartridge spindle driven by a 20 hp vector Dual-Drive (Y-Delta) motor. The VF-4 produces either 75 ft-lb of torque at a low 1400 rpm, or 250 ft-lb at 450 rpm with the optional 2-speed gearbox -- and will also run up to 7500 rpm in 1.2 seconds for finishing aluminum.